5812 PSI TO BAR DOWNLOAD THE PROTECH

The non-contact design has virtually no torque consumption, will not wear or groove shafts, and allows for non-lubricated dry running. Because it is a precision-machined seal, costs can be eliminated on tooling charges, allowing retrofit of most shaft and bore combinations. Labyrinth sealing technology applied to high performance materials allows the Parker ProTech LX Profile bearing isolator to operate far beyond the shaft speed limits of standard radial lip seals and avoids shaft wear.

An external O-ring on the outside diameter of the ProTech stator allows for easy seal installation, maintains a press fit in the seal housing, and provides a static seal against the bore for lubricant retention. The LX profile, however, is designed for vertical up shaft mounts specifically and does not have an external drain port. Enhanced internal oil splash grooves manage heavy oil splash in the bearing cavity. DESIGNThe LX Profile shares design features with the LW Profile, such as a wrap-around geometry and enhanced rotor labyrinths for a more robust and aggressive labyrinth profile over standard designs. When used to replace seals during planned or unplanned rebuilds, the LX Profile lowers shaft cost due to liberal surface finish specifications.

This unitized design also maintains the seal’s integrity by keeping high-pressure water spray, vibration or axial movement from separating or increasing the gap between the rotor and stator.APPLICATIONSThe LX profile is an enhanced design for applications with aggressive oil splash and heavy contamination. This eliminates costs associated with having to recondition the sealing surface of the shaft.The rotor and stator are assembled at Parker’s factory where they are permanently unitized, allowing for a one-piece installation. Since the rotor spins with the shaft, it will not wear, groove, or damage the shaft.

From 0 0.075 PSI up to 0 100 PSI, absolute pressure variants for 0 15 PSI, 0 - 30 PSI and a barometric type. The correct engine and clues change each. PAYDAY 2 - Hells Island Guide.

Vertical Down: Compatible for grease, and dry. Vertical Up Mounting: Compatible for grease, oil and dry Horizontal Mounting: Compatible for grease, oil and dry

Low wear, low coefficient of friction. Higher temperature applications can be handled with alternate materials. Temperature range: -40 to 250 F (-40 to 121 C) Characteristics of the various PTFE materials offered: This superior chemical resistance allows for the standardization of a single material within a plant, eliminating the cost associated with stocking duplicate sizes in expensive stainless steel or other exotic materials.

5812 Psi To Bar Download The ProTech

Click on “Where to Buy” to find a Distributor in your area, or contact Parker for assistance. Contact Parker for requirements outside standards shown in the ProTech Bearing Isolators literature document in the Product Support tab. Because this is a precision machined seal, we can manufacture virtually any configuration.HOW TO ORDER: To configure your part number, download the ProTech Part Numbering Guide from the Product Support tab. Aflas®SIZE RANGEParker manufactures the LX Profile in standard shaft diameters ranging from 0.492” to 10” (12.5 mm to 254 mm). USDA 3A sanitary standards for food and dairy product contactO-Rings: Come standard as FKM, but are also available in: